Cube Overhead Shower Arm Swivel
From $110.00Online Price only — available on orders placed through this website
Square profile overhead shower arm with a swivel joint at the wall flange, so the head angle can be adjusted after installation. Solid brass, about 318mm long with up to 286mm projection, G1/2 inch thread. Chrome or Matte Black.
Description
The Cube Overhead Shower Arm Swivel is a square profile wall arm for a fixed overhead shower, with one difference from a standard arm: a swivel joint at the wall flange. Once the arm is fitted and the tiles are finished, the head can still be angled up, down or sideways to put the spray where you want it. That makes it a practical choice for a recess where the outlet is not perfectly centred, or where two people of different heights share a shower.
The body is a 15 x 30mm rectangular brass tube with a square 54 x 60mm wall flange, so it lines up with square tapware, square rain heads and grid tiled walls. It is about 318mm long and projects up to about 286mm from the wall depending on the swivel angle. Both ends carry the standard G1/2 inch thread and it is offered in Chrome and Matte Black.
Features
- Solid brass body, 15 x 30mm rectangular profile
- Swivel joint at the wall flange, adjust the head position after install
- Length about 318mm, projection up to about 286mm
- Square wall flange, 54 x 60mm
- G1/2 inch inlet and outlet, fits any standard shower head
- Finishes: Chrome, Matte Black (PVD coated)
Length: about 318mm
Projection: up to about 286mm, variable on the swivel
Flange: square, 54 x 60mm
Connection: G1/2 inch in and out
Finishes: Chrome, Matte Black
Shower head not included
Pair it with a square rain head from our shower heads range, or see all shower arms at our Malaga showroom.
Fixed arm or swivel arm
A fixed shower arm holds the head at one angle for good. That is fine when the outlet is centred in the recess and the head is a modest size, and it gives the tidiest look with nothing to work loose. A swivel arm adds a joint at the wall so the head can be pointed after the fact. It earns its place in three situations: an outlet that ends up off centre after tiling, a very wide head that needs fine aiming, or a household where a tall and a short person both want the spray to land on them rather than on the wall behind.
The trade off is a small joint that needs to be firm. Tighten the swivel so it holds under the weight of a full rain head, and match the arm finish to the head and mixer. Matte Black arms suit black heads and black wall mixers; Chrome suits chrome. Use plumber’s tape on both threads and check for drips at the flange before the final grout and silicone.
Additional information
| Finish |
|---|
Cube square-profile overhead shower arm with swivel joint, ~318mm length
- Solid brass body
- Square / rectangular tube profile (15×30mm) — geometric look
- Swivel joint at the wall flange — adjust shower head position post-install
- Length: ~318mm
- Projection from wall: ~286mm (variable on swivel)
- Square 54×60mm wall flange
- G1/2" inlet and outlet — universal shower-head fit
- Finishes: Chrome / Matt Black (PVD-coated)
Description
The Cube Overhead Shower Arm Swivel is a square profile wall arm for a fixed overhead shower, with one difference from a standard arm: a swivel joint at the wall flange. Once the arm is fitted and the tiles are finished, the head can still be angled up, down or sideways to put the spray where you want it. That makes it a practical choice for a recess where the outlet is not perfectly centred, or where two people of different heights share a shower.
The body is a 15 x 30mm rectangular brass tube with a square 54 x 60mm wall flange, so it lines up with square tapware, square rain heads and grid tiled walls. It is about 318mm long and projects up to about 286mm from the wall depending on the swivel angle. Both ends carry the standard G1/2 inch thread and it is offered in Chrome and Matte Black.
Features
- Solid brass body, 15 x 30mm rectangular profile
- Swivel joint at the wall flange, adjust the head position after install
- Length about 318mm, projection up to about 286mm
- Square wall flange, 54 x 60mm
- G1/2 inch inlet and outlet, fits any standard shower head
- Finishes: Chrome, Matte Black (PVD coated)
Length: about 318mm
Projection: up to about 286mm, variable on the swivel
Flange: square, 54 x 60mm
Connection: G1/2 inch in and out
Finishes: Chrome, Matte Black
Shower head not included
Pair it with a square rain head from our shower heads range, or see all shower arms at our Malaga showroom.
Fixed arm or swivel arm
A fixed shower arm holds the head at one angle for good. That is fine when the outlet is centred in the recess and the head is a modest size, and it gives the tidiest look with nothing to work loose. A swivel arm adds a joint at the wall so the head can be pointed after the fact. It earns its place in three situations: an outlet that ends up off centre after tiling, a very wide head that needs fine aiming, or a household where a tall and a short person both want the spray to land on them rather than on the wall behind.
The trade off is a small joint that needs to be firm. Tighten the swivel so it holds under the weight of a full rain head, and match the arm finish to the head and mixer. Matte Black arms suit black heads and black wall mixers; Chrome suits chrome. Use plumber’s tape on both threads and check for drips at the flange before the final grout and silicone.
You may also like
-
Classic Round Overhead Shower Arm Chrome
Original price was: $85.00.$65.00Current price is: $65.00. Add to cartAdd to Quote -
Oliveri Rome Wall Mounted Shower Arm
From $117.30 Select options This product has multiple variants. The options may be chosen on the product page -
Mixx Matcha High Rise Shower Arm
From $111.20 Select options This product has multiple variants. The options may be chosen on the product page -
Round Wall Shower Arm 400mm
From $118.15 Select options This product has multiple variants. The options may be chosen on the product page