Description
Shower Screen U Channel 2100mm for 10mm Glass
A dry-glaze aluminium U channel for fixing frameless shower screen panels to the wall, floor or ceiling. The glass is held by a two-part clear PVC glazing system that is tapped into the channel, so no silicone is needed on the glass itself – only a bead between the channel and the wall.
Standard or Extended
- Standard – 19mm deep x 16mm wide. Positions the glass edge 10mm from the wall and handles walls up to 6mm out of square.
- Extended – 35mm deep. Allows up to 15mm of width adjustment inside the channel (glass edge 10–25mm from the wall), ideal where walls are well out of square or extra panel width is needed.
Features
- Dry glaze system – fast installation with no silicone on the glass
- Suits 10mm toughened glass
- 2100mm long, easy to cut shorter on site
- Internal ribs hold the 2-part clear glazing PVC securely (included)
- Fixings not supplied – use a minimum of 3 countersunk screws per channel
Installation
- Cut the channel to size and screw it to the wall (use wall plugs if there is no stud).
- Run the L-shaped rubber inside the channel with the fin facing into the shower.
- Insert the 10mm glass panel.
- Tap the clear wedge in from the outside of the screen, working from the bottom up, using a soft timber offcut and rubber mallet.
- Seal between the U channel and the wall with silicone.









