Description
The Meir Bidet Spray with Mixer puts a hand bidet spray beside the toilet with its own temperature control. Instead of a cold-only spray on a stop tap, the round wall mixer runs on a single progressive lever: turn it from off through full cold and mixed water to full hot, then use the trigger on the hand spray to control the flow. The spray hangs on the mixer body when not in use, so the whole fitting stays compact on the wall.
This listing is the finish set: hand spray, 1.2m high-pressure hose, mixer handle and round wall plate. It fits over the Meir in-wall body MHB03N-BDY, which is sold separately and installed inside the wall before tiling. If you are building or renovating, buy the body first for your plumber’s rough-in and pick the finish whenever you are ready.
Features
- Progressive mixer: one lever controls cold, mixed and hot water
- Solid stainless steel construction
- European ceramic cartridge
- 1.2m high-pressure hose
- Built-in check valve to stop water flowing back into the supply
- Flow rate of 8 L/min at 3 bar
- WaterMark certified (WK080065)
Dimensions
- Round wall plate: 65mm diameter
- Mixer body: 35mm diameter, 134mm projection from the wall
- Overall width with spray docked: 145mm, height 172mm
- Hand spray: 24mm diameter
- Wall plate tolerance: 7mm (58 to 65mm body depth)
Finishes
Available in Chrome, Matte Black, Shadow, Brushed Nickel, Tiger Bronze, Champagne and Lustre Bronze, so it can match Meir tapware, toilet roll holders and towel rails in the same bathroom.
Safety and care
The spray can deliver hot water, so set it up with care and keep it out of reach of unsupervised children. Clean with mild soapy water and dry with a soft cloth; avoid household or commercial detergents, citrus cleaners and abrasives. Full details are on the Meir spec sheet in the Downloads tab.
See the Meir range in person at QA Bathroom Warehouse in Malaga, Perth.





