Description
The Lotus Wall Mixer Diverter is the Lotus Wall Mixer with a second outlet and a switch to choose between them. One lever blends hot and cold as usual; the diverter sends the water either to the main outlet or to the second one. That makes it the mixer for a shower over a bath, where it feeds the shower head and the bath spout, or a twin shower, where it feeds an overhead rose and a hand shower on a rail.
The body is solid brass with a ceramic disc cartridge, set in the wall behind a round plate about 114mm across. The wall depth adjusts between 40 and 70mm, the lever projects about 90mm from the finished wall, and the connections are two G1/2 inch inlets, a G1/2 inch main outlet and a G3/4 inch diverter outlet. It comes in Chrome and Matt Black, with the black finish applied over the brass for a long life in a wet room.
Features
- Solid brass body, ceramic disc cartridge
- Single lever blending with a built in two way diverter
- Feeds two outlets: shower and bath spout, or overhead and hand shower
- Round back plate about 114mm across
- Wall depth adjustment 40 to 70mm, projection about 90mm
- Connections: two G1/2 inch inlets, G1/2 inch outlet, G3/4 inch diverter outlet
- Finishes: Chrome, Matt Black
Plate: round, about 114mm
Wall depth: 40 to 70mm
Projection: about 90mm
Connections: 2 x G1/2 inch in, G1/2 inch out, G3/4 inch diverter out
Finish: Chrome or Matt Black
SKU: 17B004, 17B004MB
If the shower has a single outlet, the plain Lotus Wall Mixer is the simpler choice. Pair the diverter with the Round Twin Shower Set for an overhead and hand shower, or the Round Shower Combo. Browse all shower mixer diverters at our Malaga showroom. The drawing is on the Downloads tab.
How a diverter mixer works
Behind the plate, a diverter mixer has the same cartridge as a normal wall mixer plus a valve that directs the blended water to one of two outlets. On this model the diverter is built into the lever, so there is a single plate on the wall rather than a mixer and a separate diverter button. Turn the lever for temperature and flow, and operate the diverter to switch between the shower head and the bath spout or hand shower.
The main use is the shower over bath. Without a diverter you would need two mixers, one for the shower and one for the bath, or a bath spout with its own diverter built in. A single diverter mixer is neater, cheaper to install and leaves one control on the wall. The other use is a twin shower, where the second outlet feeds a hand shower on a slide rail.
The plumber needs to know which outlet feeds what before roughing in, because the diverter outlet is G3/4 inch and the main outlet G1/2 inch. Set the body depth to suit the finished wall, and position the mixer where it can be reached from outside the shower spray, usually around 1000 to 1100mm off the floor.

