Inset Basin Square
$156.00
In Stock
In Stock
Square drop in basin in gloss white vitreous china, 410mm square with a 185mm deep bowl. The rim sits on the vanity top and carries one tap hole for a standard basin mixer, so no tap hole is needed in the bench. Overflow included. Suits standard 600mm vanities. Pop up waste sold separately.
Description
The Inset Basin Square is a drop in basin: the bowl drops through a cutout in the vanity top and the rim rests on the surface, so the basin finishes flush with the bench rather than standing on it. It measures 410mm square, which suits a standard 600mm vanity, and the bowl is 185mm deep, which gives a proper amount of water without eating into the cabinet space below.
The glaze is gloss white vitreous china, fired into the surface. One tap hole is formed in the rim at the back, so a standard basin mixer mounts on the basin and the vanity top only needs the cutout. There is an overflow in the bowl, and the 32mm outlet takes a standard pop up waste. Confirm the cutout size from the drawing on the Downloads tab before the top is cut.
Features
- Vitreous china, gloss white glaze
- 410mm x 410mm, bowl 185mm deep
- Inset (drop in) mounting, rim sits on the vanity top
- Suits standard 600mm vanity tops
- One tap hole in the rim for a standard basin mixer
- Overflow
- 32mm waste outlet, takes a standard pop up waste
Dimensions: W 410mm x D 410mm x H 185mm
Material: vitreous china, gloss white
Mounting: inset, drop in from above
Cutout: see drawing on the Downloads tab
Tap hole: 1, in the rim
Waste: 32mm pop up waste, sold separately
SKU: 7041
For a rectangular version see the Inset Basin 535mm. Pair it with the Square Basin Mixer, and browse the rest of our inset basins at the Malaga showroom.
About inset basins
An inset basin is the traditional way to put a ceramic bowl into a laminate or stone top. The rim overlaps the cutout, hides the cut edge and takes a bead of silicone, so the top does not need a polished edge and the join stays sealed. It is also the lowest option: the rim is only a few millimetres above the bench, which suits family bathrooms where children use the basin.
The important number is the cutout. It is smaller than the basin so the rim has something to sit on, and it is on the drawing for this basin. Cut the top to that size, drop the basin in dry to check it sits level, then lift it, run silicone around the cutout and set it back down. Fit the waste before the basin goes in for good, because access from below is tight once the cabinet is in.
With the tap hole in the basin rim, a standard height basin mixer sits right at the back of the bowl and the spout lands water in the centre. There is no second hole to cut in the top, and the tap and basin always line up.
Square inset (drop-in) ceramic basin, 410×410×185mm
- External: 410 × 410 × 185mm
- Material: Vitreous china, gloss white
- Inset / drop-in mounting, rim sits on vanity top
- Suits standard 600mm vanity tops
- Confirm cutout dimensions from spec sheet before fabrication
- 1 tap hole in the rim, suits a standard basin mixer
- Overflow
- Ø32mm waste outlet
- Pop-up waste not included, sold separately
Description
The Inset Basin Square is a drop in basin: the bowl drops through a cutout in the vanity top and the rim rests on the surface, so the basin finishes flush with the bench rather than standing on it. It measures 410mm square, which suits a standard 600mm vanity, and the bowl is 185mm deep, which gives a proper amount of water without eating into the cabinet space below.
The glaze is gloss white vitreous china, fired into the surface. One tap hole is formed in the rim at the back, so a standard basin mixer mounts on the basin and the vanity top only needs the cutout. There is an overflow in the bowl, and the 32mm outlet takes a standard pop up waste. Confirm the cutout size from the drawing on the Downloads tab before the top is cut.
Features
- Vitreous china, gloss white glaze
- 410mm x 410mm, bowl 185mm deep
- Inset (drop in) mounting, rim sits on the vanity top
- Suits standard 600mm vanity tops
- One tap hole in the rim for a standard basin mixer
- Overflow
- 32mm waste outlet, takes a standard pop up waste
Dimensions: W 410mm x D 410mm x H 185mm
Material: vitreous china, gloss white
Mounting: inset, drop in from above
Cutout: see drawing on the Downloads tab
Tap hole: 1, in the rim
Waste: 32mm pop up waste, sold separately
SKU: 7041
For a rectangular version see the Inset Basin 535mm. Pair it with the Square Basin Mixer, and browse the rest of our inset basins at the Malaga showroom.
About inset basins
An inset basin is the traditional way to put a ceramic bowl into a laminate or stone top. The rim overlaps the cutout, hides the cut edge and takes a bead of silicone, so the top does not need a polished edge and the join stays sealed. It is also the lowest option: the rim is only a few millimetres above the bench, which suits family bathrooms where children use the basin.
The important number is the cutout. It is smaller than the basin so the rim has something to sit on, and it is on the drawing for this basin. Cut the top to that size, drop the basin in dry to check it sits level, then lift it, run silicone around the cutout and set it back down. Fit the waste before the basin goes in for good, because access from below is tight once the cabinet is in.
With the tap hole in the basin rim, a standard height basin mixer sits right at the back of the bowl and the spout lands water in the centre. There is no second hole to cut in the top, and the tap and basin always line up.
You may also like
-
Chios 201 Ceramic Inset Basin
From $113.85 Select options This product has multiple variants. The options may be chosen on the product page -
Inset Basin
$169.00 Add to cartAdd to Quote -
Limni 530 Ceramic Inset Above Counter Basin
From $346.50 Select options This product has multiple variants. The options may be chosen on the product page -
Limni 450 Ceramic Inset Above Counter Basin
From $331.65 Select options This product has multiple variants. The options may be chosen on the product page