Description
The Oval Basin is the wide one in our above counter range. At 625mm long it fills the top of a 900mm or larger vanity on its own, and the long, shallow curve gives a generous bowl for washing hair or rinsing a face without water hitting the sides. It is 355mm front to back and 145mm high, so despite the length it does not stand tall on the bench, and the gloss white vitreous china glaze keeps it bright and simple to clean.
No tap hole is drilled. Use a wall mixer and spout above the basin, or a tall basin mixer set into the vanity top at one end or behind the bowl. Because it is an above counter basin, the vanity top only needs a 32mm hole for the waste, which suits china, laminate and stone tops alike. On a double vanity, two of these give each side a proper bowl without the vanity looking crowded.
Features
- Vitreous china, gloss white glaze
- 625mm long x 355mm deep x 145mm high
- Wide oval bowl, suits 900mm and larger vanities
- Above counter mounting, waste hole only
- No tap hole, suits a wall mixer or tall basin mixer
- 32mm waste outlet, takes a standard pop up waste
Dimensions: W 625mm x D 355mm x H 145mm
Material: vitreous china, gloss white
Mounting: above counter
Tap hole: none
Waste: 32mm pop up waste, sold separately
SKU: 4811
Pair it with the Lotus Tall Basin Mixer or a wall basin mixer, and browse the rest of our above counter basins at the Malaga showroom. The drawing is on the Downloads tab.
About wide oval basins
Most vessel basins are 360 to 420mm across, sized for ensuites and powder rooms. A 625mm oval is a different proposition: it is a basin for the main bathroom, where the vanity is 900mm or more and a small bowl would look lost on it. The extra length also makes the basin more comfortable to use, because there is room to move your hands without hitting the sides.
On a long basin the tap position matters. A single spout at the back centre works if the mixer reaches far enough over the rim, but many people put a wall mixer above the bowl instead, which keeps the bench clear and lands the water in the right place regardless of the vanity depth. If you prefer a deck mounted tap, choose a tall mixer with a long reach.
Check the vanity top before you order. The basin needs a flat area at least 625mm long, plus a margin either side, and the waste hole is offset to the centre of the bowl. Fit the waste first, sit the basin dry to check the position, then seal it down with silicone.
