Description
The Lotus Wall Mixer is the single function mixer in the Lotus range. It sits in the wall behind a round 130mm plate with one lever, and it does one job: blend hot and cold and send it to a single outlet. In the shower that outlet is a shower head on an arm or a rail. Over a basin it can feed a separate wall spout, which keeps the vanity top clear of tapware altogether.
The body is solid brass with a ceramic disc cartridge, so the lever moves smoothly and shuts off without dripping. The wall depth adjusts between 40 and 70mm to suit different tile and sheet thicknesses, and the lever projects about 112mm from the finished wall. Inlets and outlet are all G1/2 inch. It comes in Chrome, Matt Black and Brushed Nickel, with the coloured finishes applied over the brass for a long life in a wet room.
Features
- Solid brass body, ceramic disc cartridge
- Single lever, hot and cold blending, no diverter
- Round back plate about 130mm across
- Wall depth adjustment 40 to 70mm
- Projection from wall about 112mm
- Connections: two G1/2 inch inlets, one G1/2 inch outlet
- Finishes: Chrome, Matt Black, Brushed Nickel
Plate: round, about 130mm
Wall depth: 40 to 70mm
Projection: about 112mm
Connections: G1/2 inch in and out
Finish: Chrome, Matt Black or Brushed Nickel
SKU: 17B003, 17B003MB, 17B003BN
For a shower and bath, or two shower outlets, use the Lotus Wall Mixer Diverter instead. For a basin or bath filler with the spout built in, see the Lotus Wall Set. Pair it with the Round Shower Combo or the Classic Round Shower Head, and browse all shower mixers at our Malaga showroom. The drawing is on the Downloads tab.
Wall mixer or wall mixer with diverter
A wall mixer controls temperature and flow for one outlet. If your shower has a single head, or your basin has a single wall spout, this is all you need and it is the simpler, cheaper and neater option. A wall mixer with a diverter adds a second outlet and a switch to move water between them, which you need when one mixer serves a shower head and a bath spout, or an overhead and a hand shower.
The other thing to get right on a wall mixer is depth. The body sits inside the wall, and the plate has to finish flat against the tiles. This mixer adjusts from 40 to 70mm, which covers most tile and sheet combinations, but the plumber should check the finished wall thickness before roughing in so the body is set at the right depth.
Height is a matter of comfort. In a shower the mixer usually sits around 1000 to 1100mm off the floor so it can be reached from outside the spray. Over a basin it sits about 100mm above the spout so the lever clears it. Match the shower head or spout to the mixer finish so the wall reads as one set.






