Description
The Above Counter Square Basin (8050) is the taller square in our vessel range. It measures 410mm each way and stands 150mm high, so the sides are noticeably deeper than the compact 360mm version and the basin reads as a solid block on the bench. The back of the basin is a flat tap landing with one tap hole, so the mixer mounts on the basin itself. That extra height also gives a deeper bowl, which cuts down on splash and holds more water.
The glaze is gloss white vitreous china. Because the tap sits on the landing at rim height, a standard basin mixer is all you need. No tall mixer and no tap hole in the bench. Only a 32mm hole for the waste is cut in the top, so it suits china, laminate and stone tops. An overflow sits below the tap hole.
Features
- Vitreous china, gloss white glaze
- 410mm x 410mm, 150mm high
- Deep straight sided square bowl
- Above counter mounting, waste hole only in the top
- Built in tap landing with one tap hole for a standard basin mixer
- Overflow
- 32mm waste outlet, takes a standard pop up waste
Dimensions: W 410mm x D 410mm x H 150mm
Material: vitreous china, gloss white
Mounting: above counter
Tap hole: 1, on the rear tap landing
Waste: 32mm pop up waste, sold separately
SKU: 8050
For a lower, smaller square see the Above Counter Square Basin 360mm. Pair this one with the Square Basin Mixer or the Lotus Basin Mixer, and see the full range of above counter basins at our Malaga showroom. The drawing is on the Downloads tab.
About tall vessel basins
Vessel basins come in two heights. Low ones around 110 to 120mm sit close to the bench and suit standard vanity heights. Tall ones like this, at 150mm, are for bathrooms where the basin is meant to be seen, or where the vanity is lower than usual and the extra height brings the rim back up to a comfortable level.
Work out the finished rim height before you commit. A 150mm basin on a standard 850mm vanity puts the rim at about 1000mm, which is fine for adults but high for young children. If the vanity can be made lower, say 800mm, the tall basin becomes a comfortable choice for everyone.
A tall vessel without a tap hole needs a tall mixer to clear the rim. This one avoids that: the tap landing puts the mixer at rim height, so a standard basin mixer reaches into the bowl and there is nothing to fit behind the basin on the bench.
